Specifications

Contemporary & Triptych

Frame


Satin black with a woodgrain texture. Depth is 24mm. Width is 32mm of which 5mm is seen.

Print


Your chosen image is printed to Giclée standards on high quality satin paper. A matt seal in then applied, which is non-reflective, durable and has the same UV protection as regular glass. Surface can be cleaned with warm soapy water.

Substrate


Finished print is bonded to 1.5mm mount board which in turn is bonded to 2mm kraft backing. The resulting 3.5mm double substrate is strong and stable.

Hanging


Two dovetail notches machined into the top of the frame accept wall pins or countersunk screw heads. Our twin hanging system allows the picture to lay flush on the wall. Non-slip buffers are attached to all four corners. These provide ventilation and minimise side movement.

Triptychs


Your print is split into three equal sections, each framed to the above specifications. We recommend a gap of 50mm between each section.

Classic

Frame


Seven natural veneered options plus one finished in matt white lacquer. Width is 18mm and depth is 33mm.

Glazing


2mm Artscreen Antiglare from Larson Juhl. Reflection reduced; UV stabilized.

Mount


A selection of seven 1400 FSC colour options from Larson Juhl. Optional border widths are 62mm and 87mm.

Print


Your chosen image is printed to Giclée standards on high quality satin paper.

Substrate and backing


Both print and mount are bonded to 1.5mm mount board. Kraft backing is added to give an overall thickness of 5.5mm (7,5mm with glazing).

Hanging


Nickel-plated steel brackets are fitted to top corners of the frame. These accept wall pins or screw heads. Our twin hanging system allows the picture to lay flush on the wall. Non-slip buffers are attached to all four corners. These provide ventilation and minimise side movement.